1988
This
machine is in excellent running condition and is under power until Oct. 1st,
2006. After that date the machine will be dismantled and stored. This machine
is being sold to make room for a new gear grinder. Machine can be sold anywhere
except
1988
Serial # 88 / 14-02.
Technical
data (refer to page 22 of manual):
|
|
|
|||
|
|
Max.
addendum circle diameter (mm) |
1500 |
|
|
|
(1000) |
Grinding with
outer column |
|||
|
Max root
circle diameter (mm) |
150 |
|
||
|
Module |
2 |
Minimum |
||
|
25 |
Standard
Maximum |
|||
|
(30) |
Refer to
diagram on pages 592 & 593 of operators manual |
|||
|
Number of
teeth |
(5) |
Refer to
table for change gears |
||
|
10 |
Standard
Minimum |
|||
|
250 |
Standard
Maximum |
|||
|
(400) |
Refer to
table for change gears |
|||
|
Maximum
helix angle (degrees) |
45 |
Both ways |
||
|
Pressure
angle (degrees) |
14 |
Minimum |
||
|
31 |
Maximum |
|||
|
Maximum
face width @ bo = 0â (mm) |
430 |
|
||
|
Maximum
table Load (kp) |
4000 |
Including
clamping tools |
||
|
Machine
Data |
||||
|
|
Grinding
wheel diameter (mm) |
300 |
Minimum |
|
|
400 |
Maximum |
|||
|
Grinding
wheel bore (mm) |
127 |
|
||
|
Grinding
wheel width |
25 |
|
||
|
32 |
|
|||
|
40 |
|
|||
|
50 |
|
|||
|
(63) |
|
|||
|
Grinding
wheel speed (rpm) |
1690 |
|
||
|
Double
ram strokes (spm) |
70 - 190 |
Stepless |
||
|
Ram
stroke length (mm) |
25 |
Minimum |
||
|
450 |
Maximum |
|||
|
Stroke
position adjustment (mm) |
310 |
|
||
|
Rolling
feed (mm/min) |
80 - 1250 |
Stepless |
||
|
Load
connected, approximate (kW) |
24 |
|
||
|
Machine
weight, approximate (kg |
29,000 |
|
||
|
Length
(mm) |
7,700 |
|
||
|
Width
(mm) |
4,540 |
|
||
|
Height
(mm) |
3,600 |
|
||
Asking Price
$250,000.00 US, includes dismantling and packaging for seaworthy freight. All
insurance, duties, taxes, freight and assembly are the responsibility of the
buyer.
The machine
is being offered to 3 dealers plus is being posted on our website. Each dealer
must register his prospective clients with myself be e-mail. First come , first
served. Standard Machine is willing to pay up to a 10% commission for the
successful sale of the machine.
The machine
was brand new in 1986 and installed at Standard Machine in 1989 with no hours
on it.
The machine
is sold as is, where is without prejudice.
Any
questions or inquiries should be directed to Greg Porter:
gregporter@hamiltongear.com or office phone 306-931-3343 ext. 460 or cell
306-341-2587.
